Aligning the Hulls

Today we accomplished many tasks.  We finished putting a carbon sleeve on to the front beam and taped in the bulkheads to the other hull. Then we cleaned and rearranged the shop so we could move the alignment jig downstairs.  The hull halves and beams weigh 71 lbs together.  Tomorrow we will make a dagger board trunk and cut holes in the inner hulls to allow for the beams to enter.

Hull Alignment Jig

Inner hulls in jig, outer hulls on top of jig, and front beam lying on top

port inboard hull

10 hulls waiting to be moved